Chapter 04: Namespaces

After you have completed this entire tutorial, you may want to deploy your election smart contract to Testnet. Many others like you would perhaps like to do the same. If everyone would deploy Pact modules with the same name to the same network, however, it would become impossible to distinguish your Pact module from all the others. Therefore, it is not allowed to deploy a Pact module with a name that already exists on the chain you are deploying to and your deployment transaction will fail with an error if you try. Fortunately, Kadena offers a solution to this problem by introducing namespaces. You can create your own unique namespace on the blockchain and you get to decide who can update the namespace or use it to define keysets and modules inside it. As long as you choose a unique name for your namespace, all keysets and modules defined inside it will automatically be unique, too.

In this chapter, you will use the Pact REPL to test out Pact commands for defining namespaces. At the end of the chapter you will define a namespace for your project on your local Devnet. You will be using that namespace throughout the remainder of the tutorial.

The project files have not been changed since the last chapter, so if you are following along with the tutorial you can continue on the 01-getting-started branch. If you started the tutorial with this chapter, clone the tutorial project and change the current directory of your terminal to the project folder.

After cloning the project, switch branches to get the starter code for this chapter.

In this chapter you will add some code to the project for the first time. If you want to skip ahead and see the final solution for this chapter, you can check out the branch containing the starter code for the next chapter.

In the ./pact folder, create a file namespace.repl. Write an empty transaction inside this file.

If you have the pact executable installed locally, you can run the namespace.repl file using the following command in a terminal with the current directory set to the root of your project.

If you do not have the pact executable installed locally, you can run the namespace.repl file from the pact ttyd in your browser. Make sure that your local Devnet is running.

If all is well, you should see the following output.

Inside the transaction you will call the built-in Pact function define-namespace with the name of the namespace, the keyset that defines who can use the namespace and the keyset that defines who governs the namespace as arguments. This function is wrapped by the expect function in order to test that calling define-namespace will succeed. The first argument of expect is the title of the test, the second argument is the expected output of the define-namespace function and the third argument is the actual define-namespace function call. Add the following code between the begin-tx and commit-tx lines in namespace.repl and run it.

The test will fail with the message No such key in message: user-keyset. You will need to load the user-keyset and admin-keyset into the context of the Pact REPL so they can be read using the read-keyset function. Add the following lines at the top of the namespace.repl file and run it again.

At the end of the output you will see Load successful, which means that your test has passed and you successfully defined a namespace called election in the Pact REPL.

It is possible to update a namespace. In the next transaction you will update the namespace to allow the user-keyset to govern the namespace and limit the admin-keyset to only use the namespace for defining keysets and Pact modules. Add the following transaction at the bottom of the namespace.yml file and run it.

You will see the transaction fail with a message containing Keyset failure. This demonstrates that indeed only the admin-keyset is allowed to update the namespace. Sign the transaction with the admin-keyset by loading it into the context of the Pact REPL right before the last transaction. Use the following code and run namespace.repl again.

The output should show Load successful, meaning that the namespace was updated successfully.

After the second transaction, the admin-keyset no longer governs the election namespace. You can confirm this with a new transaction in which you redefine the namespace with the same permissions that you used when creating the namespace. Only, this time, you will wrap the define-namespace function inside an expect-failure function, to assert that redefining the namespace will fail. Redefining the namespace will fail this time around, because the transaction will be signed with the admin-keyset and this keyset no longer has governance permission after the previous transaction. Add the following transaction at the bottom of the namespace.yml file and run it.

To further prove that the namespace was successfully updated in the previous steps, it should be tested that the user-keyset will now be able to redefine the namespace. You will need to load the signature of the user-keyset into the context of the Pact REPL and write a transaction to redefine the namespace. The transaction will be the same as the previous one, but this time it is wrapped inside an expect function instead of expect-failure. Add the following transaction at the bottom of the namespace.yml file and run it.

If all is well, Load successful will be displayed at the bottom of the output. In conclusion, you defined a namespace election and specified a keyset that is allowed to govern the namespace and a keyset that is allowed to use the namespace. You wrote an automated test script to verify that indeed only the governance keyset can redefine the namespace. Finally, the namespace was redefined in such a way that governance permissions were handed over to another keyset. Great work!

Choosing an arbitrary namespace name like election-your-name still provides no guarantee that, by coincidence, this namespace is not already defined by someone else. To ensure that your namespace will be unique, you can create a principal namespace. The create-principal-namespace from the ns module creates a principal namespace name that is a hash of a keyset, prefixed with n_. In this example, you will use an admin-keyset that contains the public key of the sender00 account, because ns.create-principal-namespace only accepts valid public keys inside the keyset. The ns module is readily available on Mainnet, Testnet and Devnet, but to use it in the Pact REPL it needs to be loaded from the local filesystem. To that end, the ns module should be loaded from the local ./pact/root folder of the project for testing purposes.The output of ns.create-principal-namespace called with the admin-keyset can be stored in a variable (ns-name) and passed to the define-namespace as the first argument. In the ./pact folder create principal-namespace.repl file and paste the following code into it.

You will notice that the code is very similar to the code in namespace.repl. The main differences are that the ns module is loaded and the define-namespace is called with the variable ns-name as its first argument, instead of the hardcoded string election. Run the principal-namespace.repl file and verify that the test passed. If so, you have successfully defined a principal namespace in the Pact REPL and you are ready to define a principal namespace on Devnet with the admin account you created in the previous chapter.

Before you define your principal namespace on Devnet, make sure that Chainweaver is open and the Devnet network is selected. Also, verify that your admin account exists and holds KDA on chain 1. Otherwise, repeat the steps in the previous chapter to create and fund your admin account. Chainweaver needs to remain open, because you will use it to sign the transaction for defining the namespace. Switch to your editor and open the file ./snippets/principal-namespace.ts. The pactCommand variable contains the crucial bit of Pact code for defining a principal namespace, which you just tested in the Pact REPL. Also, recognize how the keyset data is added in a similar fashion as in the .repl file, with slightly different syntax. For the transaction on Devnet, a signer is also added, which was not required in the Pact REPL. After the transaction is defined, it is signed with Chainweaver. That is why you need to have Chainweaver open before executing this snippet. The remainder of the snippet deals with handling the response that the Kadena JavaScript client receives from your local Devnet.

Open up a terminal and change the directory to the ./snippets folder in the root of your project. Execute the ./principal-namespace.ts snippet by running the following command. Replace k:account with your admin account.

The Chainweaver window usually comes to the foreground as soon as there is a new signing request for one of your accounts. If not, manually bring the Chainweaver window to the foreground. You will see a modal with details of the signing request. Click Sign All to sign the request and switch back to your terminal window. If everything went well, you will see something similar to the following output.

Congratulations! You have defined a principal namespace on your local Devnet that can be governed and used by your admin account.

In this chapter you learned to define and update a namespace in the Pact REPL, allowing you to verify the behavior of Pact namespaces on your local computer before defining a namespace on the blockchain. You also learned about the difference between a namespace and a principal namespace. Finally, you used the Kadena JavaScript client to define a principal namespace on your local Devnet. In the next chapter you will define a keyset inside your principal namespace. This keyset definition will later be used to guard who can govern, i.e update, your election smart contract.